Skip to main content

Air Suspension Fork Assembly and Support

Compatible with the SUPER73-S1, SUPER73-Z1, and OG 2018 models.

Disclaimer: Please read the following information in full before beginning the installation.

We recommend taking the fork to a professional cycle mechanic for installation. Super73 will not be held liable for damages done during installation.

If you should choose to install the suspension fork yourself we recommend doing a team install to avoid any damages during installation.

Please execute the installation on a soft flat surface to avoid scratches.

Higo Plugs are made so that the indicating arrows on male and female plug match for proper connection

 

 

You’ll need the following tools to perform the installation:

  • 3mm Allen Wrench
  • 4mm Allen Wrench
  • 5mm Allen Wrench
  • 6mm Allen Wrench
  • 8mm Allen Wrench
  • 10 mm Open Wrench
  • 13 mm Open Wrench
  • 15mm Open Wrench 
  • Shock Pump
  • Torque Wrench
  • Zip Tie Cutters or Scissors
  • Zip Ties
  • Rubber Mallet

 

Included in the assembly:

  • Air Fork Assembly
  • Front Fender Bracket and Hardware
  • 10 mm Steer tube Spacer
  • Steer Tube Bolt and Dust Cover
  • Double Edge Crown Race

 

 

Assembly Tutorial Video:

Was this article helpful?
31 out of 100 found this helpful
Return to top